Home Our planks krafton® 256.40 FRP Bridge Decking Plank

krafton® 256.40 FRP Bridge Decking Plank

Appearances count! A span using 256.40 FRP bridge decking planks has the appearance of a wooden bridge with plank decking, since both sides of the plank are straight. During assembly, a joint between the FRP bridge decking elements is automatically created. This makes the plank one of a kind.

The krafton® 256.40 FRP bridge decking planks are separated by a 10mm joint, allowing for easy drainage of rainwater and quicker drying of the FRP bridge deck.
In other words, installation of an expansion joint is not necessary.

This FRP bridge decking plank is easy to handle thanks to its size and weight. It is often used for the construction of cycle and pedestrian bridges. It is also an excellent choice for jetties, walkways and platforms.

This type of FRP bridge decking element is best installed from below as this method allows the screws to be neatly concealed. Needless to say, mounting from above is also possible.

assembly instructions krafton® 256.40

87kb

Specification text krafton® 256.40

87kb

Technical information krafton® 256.40

Article	DG25640
	refurbishment and new construction
Effective dimensions	256x40mm
Evenly distributed load	5kN/m2 (500 kg per m2)
Exceptionally high point load	7 kN (700 kg) on 100x100mm
Suitable for service vehicles	5 tons (5,000 kg)
Suitable for incidental vehicles	12 tons (12,000 kg)
Maximum span width for vehicles	500 mm
Mounting on support structure	steel, composite and wood
Installation	easy and rapid
Non-slip coating	TÜV-certified non-slip coating (R12-R13) with grain sizes from 0.7 to 3 mm

Certifications of this FRP Bridge Decking Plank

The krafton® 256.40 FRP bridge decking plank has DIBt approval (Z-10.9-655). Moreover, the plank has been tested according to the Building Decree, NEN-EN 1991-2NB and Eurocode.

Description

The krafton® plank type 256.40 is highly suitable for cycle and pedestrian bridges, as well as for jetties, walkways and platforms.

For refurbishment and new construction
Effective dimensions: 256x40mm
Evenly distributed load of 5kN/m2 (500 kg per m2)
Point load of 75 kN (700 kg), on 100 x 100 mm.
Suitable for service vehicles up to 5 tons (5,000 kg) and incidental vehicle up to 12 tons (12,000 kg).
Maximum span width for vehicles: 500 mm
Suitable for mounting on steel, plastic or wooden support structures
Easy and rapid installation
TÜV-certified non-slip coating (R12-R13) with grain sizes from 0.7 to 3 mm

See next page for detailed Technical Properties krafton® 256.40

Receive within minutes

a customised quotation via our tool

Request a quotation

Do you have a question about our products?

Please feel free to get in touch

Get in touch